
POVIDONE IODINE SOLUTION IP
PVPI 5% is a dark brown yellow coloured antiseptic solution suited for pre and post surgical antisepsis.
Composition :
Povidone - Iodine I.P. 5% w/v
(Equivalent to 0.5% Iodine)
Biocidal Activity:
Broad Spectrum:
Bactericidal, Fungicidal, Virucidal, Sporicidal, Antiseptic Solution
Contact Time :
30 seconds to 2 minutes
Application :
Pre and post-surgical skin antisepsis, prophylactic casualty procedure, against infections of burns, lacerations and abrasion. Treatment of bacterial and mycotic skin infections. Protective antiseptic film under dressing, bandages and plaster casts.
Directions for use:
Use undiluted. Apply directly to skin. Allow to dry prior to application of dressing, drape or cast. Contraindicated in case of known iodine sensitivity.
Pack Size:
500 ml, 2Ltr.

PVPI 10% is a dark brown yellow coloured antiseptic solution suited for pre and post surgical antisepsis.
Composition :
Povidone - Iodine I.P. 10% w/v
(Equivalent to 1% Iodine)
Biocidal Activity:
Broad Spectrum:
Bactericidal, Fungicidal, Virucidal, Sporicidal, Antiseptic Solution
Contact Time :
30 seconds to 2 minutes
Application :
Pre and post-surgical skin antisepsis, prophylactic casualty procedure, against infections of burns, lacerations and abrasion. Treatment of bacterial and mycotic skin infections. Protective antiseptic film under dressing, bandages and plaster casts.
Directions for use:
Use undiluted. Apply directly to skin. Allow to dry prior to application of dressing, drape or cast. Contraindicated in case of known iodine sensitivity.
Pack Size:
500 ml, 2Ltr.

PI SHIELD is a rapid action, skin safe, microbicidal antiseptic surgical scrub solution for pre & post-surgery skin and hand disinfection and for cleaning,disinfection and antisepsis of bed ridden patients.
Composition :
Povidone - Iodine I.P. 7.5% w/v
(Equivalent to 0.75% Iodine)
Biocidal Activity:
Broad Spectrum:
Bactericidal, Fungicidal, Virucidal,Sporicidal. Also effective against yeast & protozoa.
Contact Time:
3 minutes.
Application:
Pre and Post surgical antisepsis, prophylactic casualty procedure against infection of burns, lacerations & abrasion, treatment of bacterial & mycotic, skin infections, Protective antiseptic film under dressings, bandages & plaster casts.
Direction for use:
- Surgical Hand scrub:
Wet hands with water. Spread about 5 ml of Scrub over hands & forearms. Without
Wet hand with water. Spread about 5 ml of scrub over both hands and forearms. Without adding more water, scrub thoroughly for 2 to 3 minutes. Use a sponge if desired. Clean thoroughly under fingernails. Add a little water and develop copious suds. Rinse thoroughly under running water. Repeat the entire procedure using another 5 ml of Scrub.
Pack Size:
100 ml, 500 ml.

HYPOSHALL is Disinfectant cleaner for floor and hard surfaces
Composition:
Sodium HypoChlorite
5% Solution W/V
Biocidal Activity:
Broad Spectrum:
Bactericidal, Fungicidal, Virucidal.
Contact Time:
1 minutes.
Application:
Use as water, surface(mopping) and dialysis machine disinfectant, Helpful in decontamination of blood & body spillages.
Direction for use:
1:100 dilution of 5% sodium hypochlorite is recommended. Use 1 part of bleach to 99 part of cold tap water.
Pack Size:
5 Ltr.

ECOBLUE is an alcoholic handrub with moisturiser. It is suitable for surgical hand disinfection & hygienic hand disinfection.
Composition:
2.5% v/v Chlorhexidine Gluconate Solution IP equivalent to 0.5% w/v Chlorhexidine Gluconate,
70% v/v Ethyl Alcohol (Ethanol) IP,
Skin Emollients, Moisturizers.
Activity:
Broad spectrum:
Bactericidal, Fungicidal & Virucidal
Effective against (Bacteria) MRSA Tuberculosis. (Viruses) HBV, HIV, HCV, H1N1, H5N1, SARS & Coronavirus.
Contact Time:
30 seconds
Application:
Before entering clean rooms/sterile areas like OT/ICU/IPD/NCU/PICU etc.
In OT before putting the gloves
In OT before & after surgery
R & D labs, clean/ sterile areas,
Personal hygiene
Direction for use:
Rub 3 ml of ECOBLUE well over clean dry hands and nails groves for at least 30 seconds
Pack size: 100 ml, 500 ml, 5 Ltr

PI STAR FOG is a ultra low volume fogging machine meant for delivering disinfectant solution as a fine atomized spray mist for environment & surface disinfection.
Features & Benefits:
Particle size generation : 5- 15 MICRONS
Liquid discharge rate : 0- 200 ml/min
Reach :20-30 ft distance & 18-20 ft height
Space treatment : Up to 7000 cubic ft or larger
Input power : 220 V AC, 3.5 AMP, 50 Hz
Nozzle assembly : Non Rotating, Vortex Design, Non Clogging, Engg. plastic
Power head housing : High Grade Engg. Plastics, Tough & Corrosion resistant
Chemical solution tank capacity : 5 Litres, HDPE plastic / S5- 304
Dead volume :100- 150 ml
Strainer/ washer : SS 304 Wiremesh
Intake air filter : Primary / Secondary Filteration
Empty weight : 4.6 kg
Applications:
Hospital, Nursing Homes & Clinics - Fumigation/ Air environment sterility in Operation Theatres, Intensive Care Units, ICCU’s Neonatal ICUs, AKD Units, Patients Rooms & General Wards, Post Operative Wards, air sterility in Microbiology Lab, Pathology Labs, Blood Banks etc.
Aerial fumigation/ air environment sterility in sterile areas of injectables, Vaccines, Tablets, Parentrals, IV Fluids, Medical Devices, Bulk Drug manufacturing areas, QC & QA areas, Microbiology Lab, R&D center, Clinical Drug Trial Centre.
Application Benefits:
Fast, highly effective, safe, non-toxic fumigation / disinfection when used with disinfectants.
Sterile areas ready for use within 1hr maximum.
No flooding of disinfectant on the floors/ surfaces.
Compatible with a wide range of disinfectants.
Note: Available in Plastic & Stainless Steel Tank.